Milkpack 1500
- Production Speed: 1500 pouches/hour
- Package Type: Pillow Pouch
- Filling range: 200 – 1000 ml
- Photoeye mark sensor: 1 pc
- Filler for liquid products: 1 pc
- Heat embossing printer: 1 pc
- Spare parts kit: 1 set
- Terms of supply: 8-10 weeks
- Start up period: 3-5 working days
- Warranty: 12 months
| PRODUCTIVITY | 1500 pouches/hour |
|---|---|
| FILLING RANGE | 200-1000 ml |
| POWER SUPPLY, MAX | 220 V, 50 Hz |
| COMPRESSED AIR PRESSURE | 5 kg/cm2 |
| AIR CONSUMPTION | ~ 0.2 m3/hour @4 bar |
| PACKAGING MATERIAL | 1/2/3-layered polyethylene film with black internal layer; thickness – 70-90 microns, width – 320 mm |
| FILLING ACCURACY | ± 0,5-1% [depending upon bulk density of product, constant product availability in the product tank (for liquids), proper maintenance] |
| OVERALL DIMENSIONS , (WxLxH) | 750 x 900x 2675 mm |
| WEIGHT, NET | ~ 450 kg |
MACHINE CONSTRUCTION
All components are mounted on a single frame. All parts in contact with the product are made from stainless steel AISI 304 . The exterior panels are made of stainless steel AISI 202. Mechanical drive. Protective and hygienic front door.
ASSEMBLIES AND MECHANISMS
Basic Elements:
- Film unwinding is provided by rubberized shaft with electric drive and operated by inductive sensors
- Ultra-violet lamp for film sterilization
- Liquid Filler
- CIP connector
Film tube forming assembly:
- Made of Stainless steel
- Two guides (“collar” with shutters) and adjusting device
- Control system of film unwinding and pulling
Vertical Sealing Assembly:
- Heating element
- Teflon tape
| Electrical Supply | Width of heating element |
|---|---|
| Electrical cable 4 х 2,5mm2 | 3 mm |
| Type of Sealing | Length of heating element |
| Constant heating | 270 mm |
Horizontal Sealing Assembly:
- Heating element
- Teflon tape
| Pouch cutting | Width of heating element |
|---|---|
| Just after packet sealing | 1.5 mm |
| Type of Sealing | Length of heating element |
| Constant heating | 150 mm |
Filling Assembly:
It is used for filling liquid products.
- Product tank
- Filler for liquid products
- Level sensors
- Valves
Film Pulling Assembly:
- 4 rubberized rollers
- Material of rollers: rubber with high friction coefficient
Operating Panel:
- Start-up and stop buttons
- Control heating elements of sealing units
- Switches of operating mode AUTOMATIC/MANUAL.
- Emergency stop button
- SSR for heating
- Programmable logic controller with display UNITRONICS
Date Coding Unit:
- Heat embossing printer
Technical Documentation:
- Maintenance manual (installation, operation and service).
- List of possible malfunctions and ways of their elimination
- Detailed instruction on installation and machine start-up
- Schematic diagrams: electric, pneumatic
- Spare parts Catalogue (SPC)
Video
Other packaging types of interest